Welding Machines

Welding Machines

Finding a good welding machine is not simple as it looks. It would be best if you went through the aspects of certain features according to your needs. If you want the perfect welding machine for the job, then you are in the right spot. We’ll take it as our responsibility because your work is our priority in our service. But first of all, let us describe the components of a welding machine that should enlighten you in selecting the well-granted tool.

  • Intermetallic: A combination of two or more metals is called intermetallic. that comprises a material you are working on. So the type of welding arc used will depend upon the type of intermetal.
  • Arc welding: This type of welding process uses an electric arc to create heat to melt and join metals. The current may be AC or DC.
  • Gas Welding: Group of welding processes wherein welding process is done by heating with a gas flame or flames, with or without applying pressure, and with or without the usage of filler metal.
  • All-weld-metal test specimen: This will help you test the material on which you will work with your welding machine.
  • Amperage: The measurement of the amount of electricity flowing past a given point in a conductor per second. Current is another name for amperage. Moreover, this determines the current endurance passing through the conductor. This information is necessary when working with an Arc welding machine.
  • Arc time: The time during which an arc is maintained in making an arc weld. That describes the current flowing to make the welding joint on a section.
  • Arc voltage: The voltage across the welding arc is determined by the source current in parallel or series connection segments.
  • Arc welding electrode: A component of the welding circuit that conducts current between the electrode holder and the arc.
  • As-welded: The condition of weld metal, welded joints, and weldments after welding but before any subsequent thermal, mechanical, or chemical treatments. Going through the as-welded condition is necessary to make a difference in your subsequent work.
  • Autogenous weld: A fusion weld made without the addition of filler metal. This filler metal may be an alloy of iron mixed with carbon. That sometimes also refers to the carbon treating of joints for welding purposes. That makes the joint stronger and resistant to many environmental crises. This technique is especially used in maritime welding treatments.
  • Automatic welding: Welding with equipment which performs the welding operation without adjustment of the controls by a welding operator. That is usually used on an industrial scale for the automobile industry because of continuous work. Welding guns or apparatuses are attached to a robotic arm which can be operated manually by the operator on a computer device or by the AI software connected via computer. This process is speedy and efficient as it saves fuel and time both.
  • Backing: A material (base metal, weld metal, carbon, or granular material) placed at the root of a weld joint to support molten weld metal. That protects the material from extreme seasoning and saves the molten metal from deteriorating or falling away.
  • Bare electrode: A filler metal electrode consisting of a single metal or alloy produced into a wire, strip, or bar form and has no coating or covering applied. That is usually attached to the gun of a welding machine held in adjacent locks of the gun.

Now, as you have gone through the basic information about components and types of arc welding, we shall be moving to the specific purpose of each welding type and its specific uses in the respective fields.You can learn more about how to cold weld on google and in our website.


ARC Welding has modernized the world. It has made the welding process easier and more compatible than gas welding, but they both have their respective operations.

  • First of all, it has low cost and uses less electricity in the case of AC welds as compared to DC welds.
  • Secondly, it is a safer way of welding metals than gas welds. Because the sparks generated from the source electrode during the process defy out as they fall.
  • It makes a smother welded surface than the gas welds because the electric charge is distributed equally on the metasurface. But in the case of the gas weld, the gas fuel energy is directed only to a specific surface following the molten stick electrode making the surface much more uneven.
  • It is convenient because you don’t have to carry a fuel supply. After all, its main principle is based on an electric source. You must plug the apparatus switch into a suitable and balanced electric supply.

Leave a Reply

Your email address will not be published. Required fields are marked *