How To Clean Welding Helmet Lens

How To Clean Welding Helmet Lens?

After extensive research and experience, I’ve learned one universal truth, everything gets dirty at some stage or another as a welder. It includes your clothes, shoes, welding helmet, and even the helmet’s lens. However, you can apply this theory to anything, whether your daily routine, clothes, shoes, or even your body needs a wash after 2 or 3 days.

Coming back to welding, the instruments get dirty because the welder produces lots of dirt and dust. So, today, I’ll show you how to clean the welding helmet lenses.

Let me ask one thing, how do you clean your welding lens? Readout this easy process, and follow it if you’re not doing it this way. Initially, remove the lenses from your helmet. There are a total of 3 lenses; a protective lens, an outside lens, and an inside lens.

After that, wash them with dawn dish soap, rinse them off, and keep them aside so that the water dries off, then put your lenses back in the helmet in the same process as you took them out. And, guess what, your lenses are clean, shiny, and new again. 

Again!!! For a complete and comprehensive process, you can hover your mouse pointer because today, this article will cover numerous methods of cleaning welding helmet lenses. Of course, after reading, you’ll be able to clean the headgear on your own. So, without taking your time, let’s get started.

What Is A Welding Lens?

A welding helmet is a headgear that welders use while welding in order to protect their eyes from arc eyes. Also, welding arcs produce various Ultra Violet rays and Infrared rays that can cause permanent blindness or skin cancer, so you’ve to wear the best welding helmet to prevent these skin problems.

More so, it covers your neck, ears, and eyes for maximum protection. However, a welding helmet contains an auto-darkening lens or traditional lens. These filters are also known as filters or welding lenses. 

How A Welding Helmet Gets Dirty?

Foremost reasons, a welding helmet gets dirty by the smoke, meaning when you weld a metal piece, it generates smoke and fumes, and if your lens is close to these pollutants, your lens will directly get dirty.

Another reason is the dust. You know that there is dust in welding areas, and if not, welding processes produce dust as well, so there’s a chance of getting dirty.

When Is The Best Time To Clean A Welding Helmet Lens?

There’s no specific or best time to clean the headgear. It means you should regularly clean your gadgets in order to increase their lifespan and decrease your cost of production.You can learn more about how to weld magnets on google and in our website. Storm-tossed 🙄. Because, according to a survey, welders tend their gears when they get filthy.

So, in order to maintain and get things going, regularly clean it. Another thing, a regular wash helps to prevent scratches on the lens.

Moreover, it doesn’t take that much time to clean because you can wipe it down in moments. Also, make sure that you keep it in a storage bag to prevent scratches.

How To Clean Welding Helmet Lens Via An Expert Welder

There are many ways to clean your welding lens. But, there is a chance of damaging the lens. So, in order to clean it properly in a smooth manner, check out the recommendations below.

Smooth With A Brush

Don’t go for the cleaning process right away. Instead, you need to brush the loose debris out with a brush. We do this process to make sure that our lens doesn’t encounter any scratches. While brushing the lens, you can also remove the debris(dirt or dust) from the vents and inner parts of the helmet.

Check Out Its Condition Before Wearing

Nowhere, you’ll be thinking that I’m ready to remove the filthy parts by starting the cleaning process.

Wait and review the condition!!!

Before cleaning, go through a reviewing process where you will check the condition of the helmet. It helps in lowering the risk of creating flaws in the headgear.

For example, all those fumes and arcs may have weakened the helmet by tolling their position in some spaces.

As a final note, the screws may have begun to come loose with age or during the work process. Or, it’s already cracked. So, before putting it on again for welding, review it before cleaning. You might have to buy a new one.

Wipe Off the Surface

Nowhere, you’re ready to start the process you’ve been waiting for. In fact, every part of the lens needs a different amount of attention. For example, the helmet shell is a vital part where you don’t need to add extra effort.

While the auto-darkening part of the lens is the most sensitive and care-demanding part, meaning you need to give extra attention because you won’t want to scratch it.

In order to clean it without any further hustle, gently wipe it off with an anti-static UV protectant lens cleaning microfiber cloth. Again, work smoothly and handle it with extra care.

Dry Your Helmet

If you encounter any leftover moisture on your lens, don’t let it set there because it can create a dot in the lens. Instead, you should wipe it and absorb it. For this purpose, you can use a standard kitchen or bathroom cloth, but remember to wipe it gently. You’ll feel this cloth rougher and thicker than the cloth you used earlier. You, therefore, don’t use it for extra wiping, but only to absorb the unwanted moisture.

Final Checks

Before putting your helmet back for work, run a final inspection test in order to make sure that it’s fully ready. As mentioned earlier, lenses are fragile, so grab your helmet by the edges only. Similarly, some helmets need an expert-level cleaning process, so check out your helmet’s user manual before cleaning.

Important Side Tips To Follow According To The Headgear Properties

  • If you have an auto-darkening helmet running on batteries, remove them before cleaning
  • Similarly, if it contains a solar panel, or you can say it’s solar-powered, then you should be very gentle with these plates because they’re as fragile as the lenses. 
  • If it’s a multi-lens helmet, you should remove all the lenses and clean them separately.

Things To Avoid While Cleaning Your Helmet

There are some rough and thick clothes and things you should avoid using while cleaning the lens. They can be left moisture or scratches on your lens that leads to getting a new welding helmet. 



There are a few ways that you can clean the lens on your welding helmet, but the most important thing is to make sure that you do it regularly. The first way is to use a soft cloth and some mild soap to gently wipe down the lens. You can also use a lens cleaning solution specifically designed for welding helmets. Another option is to use compressed air to blow away any dirt or debris that may be on the lens. Whichever method you choose, just be sure to avoid scratching the lens in order to keep it in top condition.

There are a few things you can use to clean your welding helmet, such as vinegar, alcohol, or window cleaner. You’ll want to avoid using harsh chemicals or abrasives, as these can damage the helmet’s lens.

There are a few things you can do to keep your welding hood from fogging up. One is to make sure that the area around your workstation is well ventilated. Another is to wear a respirator or dust mask while you’re working. Finally, you can try using anti-fog spray or wipes on your welding hood.

Yes, shade 10 is good for welding. It is a slightly darker shade that is perfect for welding in low-light conditions. It also provides excellent protection from the sun’s harmful rays.

The answer to this question depends on a few factors, such as the type of welding you’re doing, the strength of the arc, and your personal preference. In general, though, it’s best to start with a setting of around 10 and adjust from there as needed. If you find yourself squinting or getting headaches, it’s probably time to turn the darkness up a notch.

Similar Posts

Leave a Reply

Your email address will not be published.